Endless MotorWorks
Endless MotorWorks
  • 37
  • 1 364 079
Diagnosing Faulty Rear Park Distance Control and Installing an Aftermarket Valeo Unit on the G Wagon
In this video I am diagnosing the faulty rear parking aid, which hasn't worked ever since I bought the vehicle some time ago. As you can see in the video, it turned out that the PDC didn't work due to the fact that its control module is missing. As this is a very old Bosch unit and control modules are no longer readily available I decided to replace the entire thing with a Valeo PDC unit.
If you liked the video, please consider giving it a thumbs up and subscribe to the channel for more content like this! As always if you have any questions, feel free to post them in the comment section below. I do my best to answer to all comments.
Regards,
Endless MotorWorks Team
Music:
Song: Janji - Heroes Tonight (feat. Johnning) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/ht
Watch:
• Janji - Heroes Tonight (feat. Johnnin...
Song: Abandoned & GalaxyTones - Luna (Feat. DNAKM) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: NCS.io/Luna
Watch:
• Abandoned & GalaxyTones - Luna (Feat....
Переглядів: 91

Відео

Fixing the Broken Bits in the Interior, as well as Common Squeaks and Rattles of my W463 G-Class
Переглядів 1,1 тис.6 місяців тому
Dear viewer, In this video I am fixing the majority of the broken interior pieces of my G500 and by doing so also addressing common squeaks and rattles that W463 G-Wagon has. If you liked the video, please consider giving it a thumbs up and subscribe to the channel for more content like this! As always if you have any questions, feel free to post them in the comment section below. I do my best ...
How to Remove the AC Vent on a W463 G-Class without Breaking it
Переглядів 3 тис.10 місяців тому
Dear viewer, In this video I am showing you how the proper procedure to remove the driver's side AC vent without breaking anything. The process of removing the passenger side one is very similar, as the fastener locations are the same. If you liked the video, please consider giving it a thumbs up and subscribe to the channel for more content like this! As always if you have any questions, feel ...
How to Retrofit the Improved Facelift Accelerator / Gas Pedal on an early Mercedes-Benz G-Class
Переглядів 1,7 тис.Рік тому
Dear viewer, In this video I am showing you how to retrofit the new and improved accelerator/gas pedal that comes in newer facelift Mercedes G-Wagons (2007 through 2018) on an early G-Class. The guide is made on the G, as that is what I have, but it may be applicable to other 90s Mercedes models that use the same gas pedal and feature a DrvieByWire setup. For those of you who would want to copy...
Installing a 55W Aftermarket Xenon kit in Headlights meant for H7 Bulbs on a Mercedes-Benz W463 G500
Переглядів 1,3 тис.Рік тому
Dear viewer, In this video I am showing you how to install an aftermarket xenon (HID) kit to headlights that are meant for normal halogen bulbs (H4, H7, etc...). In my particular case, the vehicle's original headlights were for an H4 type bulb, while the new aftermarket headlights accommodated an H7 bulb. To top everything, someone installed an aftermarket xenon kit and made a very poor job at ...
How to Replace the Tailgate Hinge Seals on a Mercedes-Benz G-Class (W463 G500)
Переглядів 1,9 тис.Рік тому
Dear viewer, In this video I am showing you how to remove and replace the real panel door hinge seals, also known as tailgate hinge gaskets. The process itself is fairly easy and shouldn't take more than 10-15min. In addition to that, the seals themselves are relatively cheap. Subsequently, there really is no reason not replacing these gaskets on time, especially considering that in the long ru...
How to Replace the Front Side Indicators and Remove the Headlights on a Mercedes-Benz G500 (W463)
Переглядів 2,2 тис.Рік тому
Dear viewer, In this video I am showing you how to remove and replace the front side indicators located on top of the fenders. On the G-Wagon this process is quite involved and also requires either the removal of the headlights or of the wheel-well liners. Since I needed to align my headlights and wanted to see how everything was connected behind them, I elected to go with the first option. In ...
How to Remove the Interior Door Panel on an Audi A6 / S6 (C6 2004-2011) Without Damaging the Trim
Переглядів 13 тис.Рік тому
Dear viewer, In this video I am showing you how to remove the front interior door panel an Audi A6 C6 generation vehicle. The process itself is quite easy, straightforward and if done correctly the possibility of breaking or damaging anything is minimal. Removing the interior door panel is essential if you are going to be working on something that sits just behind it such as replacing the speak...
How to Replace D2S Xenon Bulbs on a Mercedes ML W164 / GL X164 with Factory Bi-Xenon HID Headlights
Переглядів 21 тис.2 роки тому
Dear viewer, In this video I am showing you how to remove and replace the D2S xenon headlight bulbs that are fitted to a factory bi-xenon HID headlight of a Mercedes-Benz ML W164 or GL X164. While these bulbs do last a long time in comparison to normal halogen bulbs, their light output deteriorates with time and especially when they near the end of their life span. As you can see from the video...
Front & Rear Interior Door Panel Removal and Speaker Upgrade on a Mercedes-Benz G500 (W463 G-Class)
Переглядів 8 тис.2 роки тому
Dear viewer, In this video I am showing you how to remove both the front and rear interior door panels, as well as how to remove and replace blown out speakers. As these vehicles age, the paper-cone speakers tend to disintegrate, which causes door rattles and audio distortion when playing music. If you liked the video, please consider giving it a thumbs up and subscribe to the channel for more ...
Install Aux or Bluetooth Connectivity on a Mercedes-Benz with a Command 2.0 Navigation (How to DIY)
Переглядів 16 тис.2 роки тому
Dear viewer, In this video I am showing you how you can easily add Aux or Bluetooth connectivity to your early 2000s Mercedes Benz and make it look factory. The installation itself is quite straight forward, especially if you buy the proper adapter, something which as you see from the video I obviously didn't do. That being said there is a key prerequisite in order to make all of this happen, n...
How to Replace the Engine Air Intake Filters on a 5.2L V10 FSI Audi S6 (C6 Generation 2004-2011)
Переглядів 1,9 тис.2 роки тому
Dear viewer, In this video I am showing you how you can easily replace the engine air filters on a 5.2L V10 Audi S6 - C6 Generation. Old and clogged up engine air filters can bring the vehicle down on power and also increase fuel consumption. This is why changing the engine air filters once a year is recommended. The good thing is that the process itself is in fact quite easy and there nothing ...
Dealing with Oil Leaks & Other Deferred Maintenance Items (Mercedes-Benz G500 W463 Restoration)
Переглядів 2,6 тис.2 роки тому
Dear viewer, In this video I am finally beginning the work on the multitude of engine-related issues plaguing my cheap and neglected Mercedes-Benz G500. These are mostly related, to deferred maintenance, which should have been tackled quite some time ago. More specifically in this particular video, I changing the very old engine air filters, reselling the leaking valve covers and going over the...
How to Replace a Failed Tailgate Latch Lock Mechanism on a Mercedes-Benz W164 / X164
Переглядів 20 тис.2 роки тому
Dear viewer, In this video I am showing you how to replace a failed or failing trunk latch on a ML W164 and GL X164 Mercedes Benz. The process and the latch is identical regardless if you have the base model with just the soft-close function or a vehicle that is speced out the automatic opening and closing tailgate. Usually what happens with these latches is that the soft close mechanism inside...
How to Deal with Musty Foul AC Smells in Your Vehicle - Mercedes-Benz G500 Restoration (Part 2)
Переглядів 1,5 тис.2 роки тому
Dear viewer, in this video I am showing you a step by step guide on how to get rid of / remove a bad or foul smell that is coming from your vehicle's AC. Don't forget that this will work only if you keep periodically (once a year) changing the cabin air filter and cleaning out any dirt and debris that gets trapped by it in the intake box. If you liked the video, please consider giving it a thum...
Mercedes-Benz G500 Restoration Project Intro - Buying the Cheapest Neglected W463 V8 G-Class
Переглядів 10 тис.2 роки тому
Mercedes-Benz G500 Restoration Project Intro - Buying the Cheapest Neglected W463 V8 G-Class
Air Filter Replacement on a Mercedes V6 Diesel with the OM 642 Engine (W164, X164, W211, W221, W251)
Переглядів 12 тис.2 роки тому
Air Filter Replacement on a Mercedes V6 Diesel with the OM 642 Engine (W164, X164, W211, W221, W251)
How to Prevent or Fix the Steering Wheel Column Lock Actuator Issue on an Audi A6 / Q7 (DIY Repair)
Переглядів 111 тис.3 роки тому
How to Prevent or Fix the Steering Wheel Column Lock Actuator Issue on an Audi A6 / Q7 (DIY Repair)
Step by Step Guide on how to Reset the Service Interval Reminder on an Audi A6 C6 4F (2004-2011)
Переглядів 112 тис.3 роки тому
Step by Step Guide on how to Reset the Service Interval Reminder on an Audi A6 C6 4F (2004-2011)
How to DIY Replace the Upper Radiator Coolant Hose on an Audi A6 S6 4F with the 5.2L V10 FSI Engine
Переглядів 10 тис.3 роки тому
How to DIY Replace the Upper Radiator Coolant Hose on an Audi A6 S6 4F with the 5.2L V10 FSI Engine
Removing the Front Bumper, Headlights and Moving Lock Carrier to Service Position - Audi A6 C6 4F
Переглядів 15 тис.3 роки тому
Removing the Front Bumper, Headlights and Moving Lock Carrier to Service Position - Audi A6 C6 4F
5.2L V10 Audi A6 S6 C6 / A8 S8 D3 - Intake Manifold Removal, Swirl Flaps Delete and Carbon Cleaning
Переглядів 38 тис.3 роки тому
5.2L V10 Audi A6 S6 C6 / A8 S8 D3 - Intake Manifold Removal, Swirl Flaps Delete and Carbon Cleaning
Shark Fin GPS Antenna Removal and Replacement / Repair on an Audi A6 C6 4F (2004 - 2011)
Переглядів 105 тис.3 роки тому
Shark Fin GPS Antenna Removal and Replacement / Repair on an Audi A6 C6 4F (2004 - 2011)
Fixing a Broken PCV Vent Hose and Solving a Common Vacuum Leak on 5.2L V10 FSI Audi S6 C6 and S8 D3
Переглядів 7 тис.4 роки тому
Fixing a Broken PCV Vent Hose and Solving a Common Vacuum Leak on 5.2L V10 FSI Audi S6 C6 and S8 D3
How to Replace a Leaking Coolant Expansion Tank on an Audi A6 S6 5.2L V10 FSI (C6 / 4F Generation)
Переглядів 6 тис.4 роки тому
How to Replace a Leaking Coolant Expansion Tank on an Audi A6 S6 5.2L V10 FSI (C6 / 4F Generation)
How to Remove and Replace the Lower Bumper Grilles / Fog Light Grilles on an Audi S6 (C6 2004-2011)
Переглядів 15 тис.4 роки тому
How to Remove and Replace the Lower Bumper Grilles / Fog Light Grilles on an Audi S6 (C6 2004-2011)
How to Repair a Broken Seat Belt Presenter on a Mercedes CLK W209 / C209 / A209
Переглядів 35 тис.4 роки тому
How to Repair a Broken Seat Belt Presenter on a Mercedes CLK W209 / C209 / A209
Removing the Rear Interior Door Panel on a Mercedes CLK C209 / W209 / A209
Переглядів 61 тис.4 роки тому
Removing the Rear Interior Door Panel on a Mercedes CLK C209 / W209 / A209
Firmware and Navigation Update Tutorial Audi MMI 2G and MMI 3G (Including Download Links)
Переглядів 325 тис.4 роки тому
Firmware and Navigation Update Tutorial Audi MMI 2G and MMI 3G (Including Download Links)
Endless MotorWorks gets a 5.2L V10 Audi S6 Avant - Super Wagon with Lambo Engine on a Budget
Переглядів 2,7 тис.4 роки тому
Endless MotorWorks gets a 5.2L V10 Audi S6 Avant - Super Wagon with Lambo Engine on a Budget

КОМЕНТАРІ

  • @faridmuradov9623
    @faridmuradov9623 День тому

    Hello..thanks for such a video. When writing to a CD disk, do you write it as an ISO file or do we transfer the ISO file to a folder and write it to a normal CD disk?

  • @ayoubkarioh3301
    @ayoubkarioh3301 2 дні тому

    Hello, very nicely done, it looks great. Can I have the item number of the radio housing? Thanks.

  • @stridgiftw
    @stridgiftw 3 дні тому

    Hello, i've performed the reset following your video, even after 500KM driven it still appears the same message " Service interval display are not yet avaible" for how long should i drive until i get some new numbers after the new oil change,.

  • @olethalb
    @olethalb 6 днів тому

    Having owned the previous generation A6, this issue nearly swayed me from buying the C6. I’ve had it for nearly 2 years no issues until yesterday i took the key out and heard a clonking from the column, i knew it was likely this issue. Luckily i found this vid, followed the steps but depinned the red and black wire right away so no more lock or worries! Thanks for taking time to make the video 👍🏻

  • @nickolaihansen4648
    @nickolaihansen4648 15 днів тому

    Hello i have the problem but mine can’t unlock how do i get it to do that?

  • @Confirm_selection
    @Confirm_selection 19 днів тому

    Interpretation: Removal of short/long intake differential flaps.

  • @marianualart
    @marianualart 19 днів тому

    I just bought a 2007 A6 with 160K Miles on it with several issues that I can't blame for the price. One of them was that the steering lock was reluctant to work once in a while so I figure it was only waiting for the most inappropriate opportunity to fail completely. Of course I followed your easy video now that I'm still on time. Thank you so much for spare me such a huge headache.

    • @mendocinorider
      @mendocinorider 18 днів тому

      How much did you pay for it? I have mine for sale and have had no offers or questions at all it has 150k in perfect condition. It just needs abs module repaired and CEL comes on sometimes then goes away.

  • @Schnippen_Schnappen1
    @Schnippen_Schnappen1 21 день тому

    Get to the fucking point JESUS FUCKING CHRIST!

  • @cev9197
    @cev9197 23 дні тому

    Спасибо!

  • @Konstantinebmw
    @Konstantinebmw 26 днів тому

    Thank you man!👍

  • @rdrjr4129
    @rdrjr4129 27 днів тому

    Mine also has a connector in that spot already. Did you ever figure out what it was for?

  • @zoomed66
    @zoomed66 Місяць тому

    I'm guessing this procedure stops the micro switches and relays wearing down as the steering lock mechanism is never activated once power is cut. Great idea

  • @DaReal_Gk3sidee.
    @DaReal_Gk3sidee. Місяць тому

    And They Want 4000 To Replace That And You Can Just Take The Flaps Out

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      Yes you can take the flaps out, but not a lot of people are actually going to do that, as it is quite an involved job.

  • @SibusisoMaxwell-hz9gn
    @SibusisoMaxwell-hz9gn Місяць тому

    I have a q7 the steering is locked it doesn't wanna start the cluster no lights coming in I don't know what to do

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      Based on what you are describing probably you have a flat battery. I would start by measuring the battery voltage with a multimeter.

  • @MartinDeLucca
    @MartinDeLucca Місяць тому

    Hello friends!. I have the same issue with my Audi A6 Quattro 2005. The steering wheel actually is unlock, but the car don´t start and when i put the key in the ignition nothing happens then. I like to do the action on the video descripted.

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      If your steering wheel is unlocked then you do not have the issue that I am referring to in this video. The 2005 A6 is also probably a C5 generation so the lock mechanism and wiring will be different. I would recommend getting your vehicle scanned for errors, as that is the correct way to diagnose the issue.

    • @MartinDeLucca
      @MartinDeLucca Місяць тому

      Thank You! @@EndlessMotorWorks

  • @fredcarter7003
    @fredcarter7003 Місяць тому

    You showed nothing,what a waste of time,sht video

  • @nickbogdanos2
    @nickbogdanos2 Місяць тому

    Does it work also on Touareg 7L with the steering lock?

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      I can't say whether it will be the exact same procedure and same wire that you will need to cut, but I would assume it is pretty similar. You will need to find a wiring diagram in order to know which wire powers what an to cut the right one.

  • @kristicampbell7246
    @kristicampbell7246 Місяць тому

    Amacing thabkyou so much

  • @kizuhara93
    @kizuhara93 Місяць тому

    for A3 2010?

  • @fiore114
    @fiore114 Місяць тому

    Great informative video! Do you have code for begel side lights?

  • @noamelia8817
    @noamelia8817 Місяць тому

    Hi: Great videos! did you had a chance to also take care of the lose springs of the driver seat?

  • @Ambi6
    @Ambi6 Місяць тому

    HI! I have this problem but even the vcds cannot get power so i can't unlock the fu***g car in any way. What can I do??

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      When you say that VCDS doesn't have power, I assume that this means the OBD2 port doesn't get power. Is there any power in the vehicle at all? I do recommend measuring the battery voltage

    • @Ambi6
      @Ambi6 Місяць тому

      @@EndlessMotorWorks Hey! Haha yes I did it was 4.2V

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      @@Ambi6 Not nearly enough voltage in the battery. It should be minimum 12V. This means that either the battery is bad or it isn't charging (bad alternator). I recommend starting there.

  • @Rogerrrrr
    @Rogerrrrr Місяць тому

    Can I find only the exterior plastic, I mean that cover you removed it first, without buying the entire antenna with cables as well? My exterior piece is broken as well very little but gps and radio is working fine

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      I don't believe that you can buy new just the plastic. The part number is for the entire antenna assembly so Audi will sell that. If you want to buy just the plastic, you should be able to get it somewhere on the used market. That being said, repairing the old plastic cover isn't that difficult. You can always glue it, sand it and have it painted.

  • @noamelia8817
    @noamelia8817 Місяць тому

    what year is the car and where I can buy these replacement upgraded headlights? thanks!

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      My G wagon is an 08/2002 model year. The headlights can be found on Ebay. There are tons of different options so you will need to pick the ones you like and fit your budget.

  • @guraygul6961
    @guraygul6961 Місяць тому

    will it work Audi A6 1999 ? Thanks

    • @EndlessMotorWorks
      @EndlessMotorWorks Місяць тому

      Probably it will. I have seen some people commenting that they have done something similar on other VW/Audi models and it has worked out for them. Do note that the wiring will be different so you will need to find a wiring diagram and see which wire goes to where and what does it power.

  • @wesleyrietveld5329
    @wesleyrietveld5329 2 місяці тому

    It works, i did the job today.. i was really scared but everything turned out fine thanks! 👍🏻

  • @TheMaximusjackson
    @TheMaximusjackson 2 місяці тому

    How do i get download link?

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      Scroll down to the video description. All links are available there.

  • @dawnsoriano1992
    @dawnsoriano1992 2 місяці тому

    Hello sir I was wondering where you got the CDs for this update. I have no idea where to get them and if you can provide the address I would truly truly appreciate you very much. I just bought the car and I don't have any of the extra benefits of my mmi system. Thank you from the bottom of my heart. Dawn S.

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      Links to the CD data can be found in the video description

  • @marselbejko1989
    @marselbejko1989 2 місяці тому

    Finished yesterday the DIY Repair as you showed in the video, and I only can agree on everything you´ve done! I watched your video about 20x till I had everything in my mind, and even then watched beside. Flaps are our, Idle is fine. A bit less torque in the lower RPM, but tremendous sound even in lower RPM! On the upside though, it feels better on 3000+ RPM. Car runs smooth, no issues, no check engine at all. Keep it up man ;)

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      Thanks for the feedback! I happy to hear you managed to do the same procedure by following the video.

  • @eljaay34
    @eljaay34 2 місяці тому

    Hello Great video. My problem is a bit different a message came up saying please take load off steering and the car would not start. but the steering did not lock like it normally does. Instead when I put in key I hear the noise like it wants to unlock but twice. This was happening with the mmi screen coming on and the date signal on the dash coming on. After seeing on an Audi forum a post to turn steering wheel 180 degrees with foot on the brakes and try to start. Did this but to no avail. Unfortunatly now the mmi not coming on and no date signal on dash but still noise like it is trying to unlock but twice. any advise?

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      First thing I would do is scan the car for errors and check the battery for proper voltage. Generally, based on what you are describing, one of two things is probably happening. 1st - possible steering column lock actuator. 2nd - Immobilizer fault

  • @JesseAfonso-fp3sb
    @JesseAfonso-fp3sb 2 місяці тому

    I have a q7 2006. Its stuck on bootloader . Thr CD changer works i used a vertabim dics as it was told is the best. In terms of the my issue its saying it failed to find metainfo on the mmi screen but on the cd1 i inserted it into my PC i only was only able to find metainfo2 on the file.

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      Make sure you are downloading the proper files for your vehicle as they are region-specific. If you try to install a firmware that is not made for your vehicle's region the update will fail with the metainfo not found error. Also make sure you are not extracting the image into the disc, but rather burning the image itself.

    • @JesseAfonso-fp3sb
      @JesseAfonso-fp3sb 2 місяці тому

      Hello I can see a folder called macosx for the europe q7 firmware. Do I used that downloaded folder if I'm using a mac os. Also do I need to get a dvd to update the navigation at the same time

    • @JesseAfonso-fp3sb
      @JesseAfonso-fp3sb 2 місяці тому

      I've done it thank you system restored run some test and everything is perfect you are a legend . I will update the navigation with a vertabim disc but your a legend thank tou

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      @@JesseAfonso-fp3sb I glad it worked out and you managed to fix your MMI.

    • @JesseAfonso-fp3sb
      @JesseAfonso-fp3sb 2 місяці тому

      Just anything thing when I burn the navigation on the dvd I'm having errors

  • @marselbejko1989
    @marselbejko1989 2 місяці тому

    Did you disconnect the Batery before doing this job? Just asking out of curisousity.

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      No, battery wasn't disconnected, as there aren't any major electrical components being disconnected.

  • @StudioGoldsmith
    @StudioGoldsmith 2 місяці тому

    Cool S6

  • @nerijusnaujas322
    @nerijusnaujas322 2 місяці тому

    I need Audi MMI 2G High North America Navigation Maps. Please share

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      I don't have these maps. The software that I was able to find is all linked in the video description.

  • @alexharit2477
    @alexharit2477 2 місяці тому

    Hi do you know if you need to remove the glovebox on the w203 aswell?

  • @CrashedCrash
    @CrashedCrash 2 місяці тому

    Thanks for your Video :) Maybe u can help me, i have the A6 4F (2005) with the telephone holder in the middle. Do I need the CD2? Because I dont have Bluetooth. Best regards

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      CD2 updates Bluetooth and telephony, so yes, it would be good to do that update as well

  • @aykutakkaya1399
    @aykutakkaya1399 3 місяці тому

    Do you know how the other side could be loosened?

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      Same principle, just need to remove the glovebox to gain access to the fasteners

  • @marselbejko1989
    @marselbejko1989 3 місяці тому

    Recently bought a S8, seems like the same engine. Guys like you make´s our live´s easier man. Much apreciation from Austria here. I hear this clapping sounds while in "P" and pressing the gas up to 3k *clapclapclapclap* So I mostlikely have to do the same as it seems. Cheers!

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      Yeah, it definitely seems that the manifold flaps have started to break down. I am happy to hear that you found the video helpful

    • @marselbejko1989
      @marselbejko1989 2 місяці тому

      @@EndlessMotorWorks thanks a lot man. Did you have any issues after removing them? Anything that would be good to know?

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      @@marselbejko1989 No issues whatsoever that will stem from the removal of the flaps.

    • @marselbejko1989
      @marselbejko1989 2 місяці тому

      @@EndlessMotorWorks thanks for keeping up the flow of information for the community. God bless patient people like you.

    • @EndlessMotorWorks
      @EndlessMotorWorks 2 місяці тому

      @@marselbejko1989 Thanks

  • @user-sx2lb1eo2u
    @user-sx2lb1eo2u 3 місяці тому

    I to have a 2002 G 500 and im getting ready to put the after market halo lights on, and im hoping my factory brackets will fit the new halo lights , i looked at 2 videos on how to put them in ,so both were a little diffrent, so the plan is to put both videos together to make my master piece lol , thanks for your video it really helped a lot.

  • @e36328stroker
    @e36328stroker 3 місяці тому

    Thank you so much !

  • @danielflood8416
    @danielflood8416 3 місяці тому

    Didn't see how you connect the cable that connect to the handle to open the door.

  • @cako7139
    @cako7139 3 місяці тому

    The links in the description "Audi MMI 2G High Navigation Maps (Eastern Europe) & Audi MMI 2G High Navigation Maps (Western Europe)" are they the latest official 2018 updates or the modified 2019 without TMC?

    • @EndlessMotorWorks
      @EndlessMotorWorks 3 місяці тому

      They are the latest official maps that Audi released for the MMI 2G

    • @cako7139
      @cako7139 3 місяці тому

      @@EndlessMotorWorks worked great with those files

  • @alextavuchis2655
    @alextavuchis2655 3 місяці тому

    what a good video, i am going through this and find the direction given easy to follow. well done.

  • @3piont5for30
    @3piont5for30 3 місяці тому

    If you have this problem AND an SRS warning light the most LIKELY issue is an expired SEATBELT BUCKLE SENSOR, 20 pound/25 dollars off ebay. One bolt, takes 5 minutes.

  • @BarrieWarner-xz7zp
    @BarrieWarner-xz7zp 3 місяці тому

    Mine has the problem but not locked i have cut the wire will i need a plug in to sort this as still no ignition lol

  • @BarrieWarner-xz7zp
    @BarrieWarner-xz7zp 3 місяці тому

    Mone has the problem but not locked I have cut the wire but now do I need a program to reset the fault

  • @3nginuur
    @3nginuur 3 місяці тому

    Awesome. I was trying to plan on adding a push button and was wondering how to disable this. Thank you very much.

  • @user-uw7vh7zh5h
    @user-uw7vh7zh5h 3 місяці тому

    Привет! Смених и аз бравата спрямо указанията ти и се получи. Проблема при мен е че след като я смених спря да се вдига и затваря автоматично. Имаш ли някакви идеи от какво може да е? Поздрави!

  • @sw3plox
    @sw3plox 3 місяці тому

    Hey, bro! I need your help. My dad really wants the navigator in the W164 car, but we don’t have the drive. Where can I download it?

    • @JoeNasr123
      @JoeNasr123 28 днів тому

      Dude that shit is decades old. Give him a cell phone.

  • @JMay1127
    @JMay1127 4 місяці тому

    My 2012 Audi A6 Prestige has developed this problem. Too often when I attempt to start it after a day or two of not driving it ‐ with foot on brake I press the start/stop ignition button -- it fails to start, but provides message "Please Move Steering Wheel". I want to perform the procedure outlined in this video, but like I say my unit is a model year 2012 which puts it in the C7 level. Can I perform the instructions on this video to my 2012 A6 - C7? ADVISE!! PLEASE Jim

    • @JMay1127
      @JMay1127 4 місяці тому

      I failed to mention the obvious. After I turn the steering wheel as instructed and with foot on break press the start/stop button-- IT CRANKS RIGHT UP!!!